Curved and Creative LED: Curved, Corner and Columns
Creative LED means screens that follow the building instead of a flat rectangle: curved walls, corners and wrapped columns. We design and install them for lobbies, airports, malls and building exteriors, where the screen is part of the architecture. Grand Encore builds them across the UAE and the GCC.
Updated November 2026 by the Grand Encore team
Where Curved and Creative LED Fits
Typical projects we plan and install.
Curved Walls
Concave or convex walls that follow a curved lobby, stage or facade.
Corner Screens
Content that runs around a corner, indoor or outdoor, for a strong 3D look.
LED Columns
Screens wrapped around pillars in terminals, malls and lobbies.
Feature Pieces
Custom shapes for brand spaces, exhibitions and launches.
How Curves and Corners Are Built
Curved walls use cabinets with adjustable locks or flexible modules. Each cabinet is set to a fixed angle, so the curve is drawn in the design stage, not on site.
Corners need matched cabinets on both faces and content made to the exact pixel map, so the image folds cleanly around the edge.
Columns are measured carefully, because the screen has to close around the pillar with no gap. Flexible modules work for round columns; square columns use flat cabinets on each face.
Pixel Pitch
| Pixel Pitch | Closest Comfortable Viewing | Typical Use |
|---|---|---|
| P1.2 | From 1.2 m | Boardrooms, control rooms, broadcast sets |
| P1.5 | From 1.5 m | Meeting rooms, executive lobbies |
| P1.9 | From 2 m | Hotel and office lobbies, retail feature walls |
| P2.5 | From 2.5 m | Malls, halls, showrooms |
| P3.9 | From 4 m | Stages, events, rental walls |
| P4 to P5 | From 5 m | Shopfronts, building entrances (outdoor) |
| P6 to P8 | From 8 m | Building facades, stadium screens |
| P10 | From 10 m | Roadside and rooftop screens |
Related Work
Photos from our installations. Captions describe each project.
How We Deliver It
From your first message to years after handover. One team, seven steps, and you always know what happens next.
- 1
Call or Chat
Tell us what you need by phone, WhatsApp or chat. One person takes your project from here.
- 2
Site Visit and Measuring
We visit, measure the wall or structure, check power and access, and take photos.
- 3
Design and Mockup
You get a drawing of the screen on your wall, the pitch and size, and a clear quote.
- 4
Approvals Handled
If the screen needs RTA, Municipality or other approval, we file it. Fees are charged at cost.
- 5
Installation
Our own team fixes the structure, cabinets or mounts and hides the cabling, nights and weekends if needed.
- 6
Switch-On and Handover
We switch it on with you, calibrate colour and brightness, and show your team how it works.
- 7
Care After Handover
Maintenance, spare modules and a phone that is answered 24/7.
Questions About Curved and Creative LED
How tight can an LED screen curve?
It depends on the cabinet. Standard curved cabinets bend a few degrees per joint; flexible modules can wrap a round column. We check the radius in the design.
Does curved LED cost more than flat?
Usually a little, because of the special cabinets, the structure and the content mapping. The bigger cost drivers are still pitch and size.
Who makes the content for a corner screen?
You can use your agency. We give them the exact pixel map and test files so the content fits the fold.
Can a column screen be serviced?
Yes. We specify front-service modules so a single module can be changed without taking the column apart.
Get a Quote for Curved and Creative LED
Tell us what you need and where. We reply by phone or WhatsApp.
- WhatsApp+971 50 387 2010
- Phone+971 4 225 3080
- Emailsales@grandencoreonline.com
- HoursOpen 7 days. Our team works 24/7.